EN

EN

CN
Installation and maintenance
Focused on producing flooring for 23 years
Installation and maintenance
Lock floor

Heavy bamboo locking flooring is easy to lay, easy to dismantle, is the first choice of DIY family, can save you a large amount of paving costs.

 You just need to assemble the flooring piece by piece according to the method shown, 

and it is easy to lay the flooring with a seamless and beautiful surface.



To complement our flooring, we offer a complete set of flooring accessories, 

including outer corner reduction boards for stairs and quarter round edges, 

which are made from heavy bamboo and have the same quality and characteristics as the flooring and are available in the following shapes.

  • Simplified board
    Sizes:1850mm*45mm*12mm
    Structure: Heavy Bamboo
    Color: Carbonized/Natural
  • Simplified board
    Sizes:1850mm*45mm*12mm
    Structure: Heavy Bamboo
    Color: Carbonized/Natural
  • Simplified board
    Sizes:1850mm*45mm*12mm
    Structure: Heavy Bamboo
    Color: Carbonized/Natural
  • Simplified board
    Sizes:1850mm*45mm*12mm
    Structure: Heavy Bamboo
    Color: Carbonized/Natural
  • Simplified board
    Sizes:1850mm*45mm*12mm
    Structure: Heavy Bamboo
    Color: Carbonized/Natural
  • Simplified board
    Sizes:1850mm*45mm*12mm
    Structure: Heavy Bamboo
    Color: Carbonized/Natural
Decking
  • 1. Fix the keel to the ground with screws.
  • 2. Pave a floor onto the keel, and then push a fastener above each keel into the cherry blossom groove.
  • 3. Clip the second floor slot into the other side of the fastener.
  • 4. Connect each fastener to the keel with wooden screws to secure the floor, and so on.
Floor flatness requirements
Measure the ground with a 2m guiding rule, and the height of the garbage between the guiding rule and the ground should be ≤ 5mm
Ground moisture content
No more than 20%, and rectification should be carried out if it exceeds the limit.
Keel
Keel thickness: ≥ 20mm, width: ≥ 35mm
Sub floor (optional for use)
Thickness ≥ 9mm, using multi-layer plywood, blockboard, and particle board
Anti lake cloth
The moisture-proof interface should be tightly glued, and the interface should be overlapped by more than 20cm, and the wall corners should be turned up 5cm
Clearance between floor and wall
8-12mm
Floor eye-catching angle
An angle of 30 ° -50 ° from the horizontal
Requirements for pavement width and length limitations
The laying length in the width direction of the floor is ≤ 6m, and the length of the floor is set to be $10m. In order to meet the above requirements, a winding system should be set up in appropriate positions and decorated with cloth strips.
Floor flatness requirements
Measure the ground with a 2m guiding rule, and the height of the garbage between the guiding rule and the ground should be ≤ 5mm
Ground moisture content
No more than 20%, and rectification should be carried out if it exceeds the limit.
Anti lake cloth
The moisture-proof interface should be tightly glued, and the interface should be overlapped by more than 20cm, and the wall corners should be turned up 5cm
Clearance between floor and wall
8-12mm
Requirements for pavement width and length limitations
The laying length in the width direction of the floor is ≤ 6m, and the length of the floor is set to be $10m. In order to meet the above requirements, a winding system should be set up in appropriate positions and decorated with cloth strips.
Privacy Policy License

© 2023 All rights reserved

English

Chinese